CO-100~350 Series Oil Chiller Product Model Instruction

CO-100~350 Series Oil Chiller Product Parameter Table

>>>Oil Chiller Introduction

Absorbing foreign advanced product technology, tracking the development trend of international products, condensing the company's years of design experience in the industrial refrigeration industry, focusing on user needs as its own responsibility, and continuously promoting the new generation of Internet oil coolers. There is inevitably the problem of heat generation in machining. The heating causes thermal deformation of the equipment and products, resulting in a series of problems such as reduced processing accuracy, unstable mechanical actions, increased errors, wear of old tools, poor quality of processed surfaces, degraded oil quality, and increased maintenance costs. In order to ensure the accuracy of machining, improve product quality, give full play to the functions and efficiency of the machine, and eliminate the thermal impact of machining is an urgent task. CO series products are oil cooling devices specially developed for this purpose.

>>>Oil Chiller Function

1. Prevent the heat of the machine tool

2. Prevent the deviation of the spindle center of the machine tool

3. Prevent oil oxidation and evaporation

4. Stabilize oil pressure and prevent oil shock

5. Improve the machining accuracy of machine tools

6. Extend the life of equipment and tools

>>>Oil Chiller Main Feature

1. The main components are word brand components, and the unit configuration is further optimized, with small size, good performance and high reliability.

2. The evaporator adopts an all-stainless steel plate heat exchanger to reduce cooling loss, improve refrigeration efficiency and host pressure performance.

3. Imported variable pump and new piping system are adopted, with low noise, effectively avoiding oil leakage and oil leakage, and can work normally at lower oil temperature.

4. Adopt a new generation of microcomputer control, touch film button operation, dual parameter digital display, precise temperature control.

5. Equipped with multiple protection functions, with fault sub-item location and alarm display, which is convenient for maintenance. Provide passive contact (normally closed) alarm output and remote control, which can be connected with the machine tool control system to form a closed-loop monitoring system and improve the safety of the machine tool control system.

6. With flow and liquid level alarm devices, it effectively avoids the damage to the refrigeration system and equipment caused by the flow is too small or there is no oil.

7. A complete range of models: 1) It has a dual-purpose model that starts heating when the oil temperature is lower than 10°C, and stops heating when it reaches 13°C. In addition, a high-temperature unit is provided. 2) There are two control modes (fixed temperature type and room temperature co-adjustment type) (the control panel can be adjusted and converted) to meet the requirements of different machine tools.

8. High-quality appearance, plastic spray treatment on the whole surface, reasonable structure, beautiful appearance, and easy daily maintenance. 

*Standard products are available in stock, non-standard products can be customized according to user requirements,  welcome clients to call us.

*For product parameters/product quotations, please contact MB:+86 18930180221, QQ3126177559, and technical support please contact MB: 18916098811.