OR Serier Tube & Sheet Heat Exchanger

1. Large heat transfer area: Oil Cooler OR Series use multi-tube for heat transfer, the heat transfer performance is very good as the contacted area is larger.

2. High efficiency of heat transfer: the copper tube of Oil Cooler OR Series is 99.9% of purity which is the best as cooling tube for heat transfer.

3. Oil leak-proof: because the tube plate and shell are shaped integrate, that is good for avoiding the mixture of water and oil, and the leakproofness performance of every Oil Cooler has been tested before delivery from factory.

4. Easy to install: foot-stand of Oil Cooler can rotate around 360°freely, so during installation, it is very convenience to weld the Oil Cooler into mother-machine or any position of the oil sink according to the specific requirement.

OR Serier Tube&Sheet Heat Exchanger Paramter Table

OR Serier Tube & Sheet Heat Exchanger Usage Notice

1. The two sides of the oil port of the cooling pipe can freely determine the inlet and outlet. The flow direction of the oil itself is not restricted, and the water inlet must enter from the bottom, and the water outlet from the upper outlet.

2. Only fresh water is used. Special order is required for the use of sea water.

3. Food and chemicals must not be used.

4. It cannot be installed when the temperature difference between the water inlet and the oil inlet is above 80.

5. Maximum pressure: 10kg/cm2 on the oil side and 7kg/cm2 on the water side.

*Standard products are available in stock, non-standard products can be customized according to user requirements,  welcome clients to call us.

*For product parameters/product quotations, please contact MB:+86 18930180221, QQ3126177559, and technical support please contact MB: 18916098811.